OPTICAL
10G CWDM SFP 1550nm 80KM
10G CWDM SFP 1550nm 80KM is a high performance and cost-effective 10Gb/s CWDM SFP+ ZR transceiver module, which provides a high capacity, high bandwidth communication solutions for multiplexed optical networks.
This CWDM SFP+ ZR transceiver module is designed for 10 Gigabit Ethernet links up to 80km over single mode fiber.
Request more information/offer
1×4 Single Mode PLC Splitter
1×4 Single Mode PLC Splitter (Planar Lightwave Circuit Splitter) with Fan Out & SC/APC Connectors
PLC stands for Planar Lightwave Circuit. PLC splitters are used to distribute or combine optical signals. It is based on planar lightwave circuit technology and provides a low cost light distribution solution with small form factor and high reliability.
Request more information/offer
40G QSFP-ER4 40 KM
40G QSFP-ER4 40 KM transceiver modules are designed for use in 40 Gigabit Ethernet links over single mode fiber. They are compliant with the QSFP+ MSA and IEEE 802.3bm 40GBASE-ER4. Digital diagnostics functions are available via an I2C interface, as specified by the QSFP+ MSA.
The optical transceiver is compliant per the RoHS Directive 2011/65/EU.
Request more information/offer
40G QSFP-ER4 60 KM
Model Number: QSFP-ER4 60 KM 40G
Use: FTTX
Data Rate: 40G
Distance: 60KM
Type: Optical Fibers
Brand Name: OEM
Request more information/offer
Adaptor SC-APC
Adaptor SC-APC
Single Mode Simplex Fiber Optic Adapter, Plastic, 0.2dB Insertion Loss
Fiber optic adapters, or fiber optic couplers are used to terminate or link the fiber optic cables or fiber optic connectors between two fiber optic lines. By linking two connectors precisely, fiber optic adapters allow the light sources to be transmitted at most and lower the loss as much as possible. Each fiber optic adapter is individually and rigorously tested and certified under drinia.tech fiber optic inspection processes to make sure low insertion loss and good interchangeability and re-producibility.
Request more information/offer 
CWDM Module
A CWDM (Coarse Wavelength Division Multiplexing) module is a device used in optical fiber communication systems to multiplex multiple optical signals onto a single fiber. It works by using different wavelengths of light (colors) to carry separate signals, which are then combined into a single fiber using the CWDM module. The module separates the different wavelengths of light at the receiving end, allowing each signal to be sent to its intended destination.
CWDM Module is a low-cost method to maximize existing fiber by decreasing the channel spacing between wavelengths. CWDM has a lower cost per channel than dense WDM (DWDM) and no configuration is necessary. CWDM optical devices can increase bandwidth on existing fiber infrastructure and alleviate fiber exhaustion. CWDM optical devices are available as 4-channel, 8-channel or 16-channel mux/demux modules or as an add/drop module.
Datasheet
Request more information/offer
CWDM MODULE DEMUX
CWDM MODULE DEMUX 1260nm - 1610nm , Channel CWDM Filter SC / APC
CWDM ( course wavelength division multiplexing) is technologie used in fiber-optic networks to send multiple signals on different wavelengths of light across a single strand of fiber cable. Request more information/offer
DKT Optical Attenuators
DKT Optical Attenuators fiber optic attenuators are devices to reduce the optical fiber power by a certain level within the fiber optic network. Fiber Attenuators are usually used when the signal arriving at the receiver is too strong and hence may overpower the receiving elements. This may occur because of a mismatch between the transmitters/receivers (transceivers, media converters), or because the media converters are designed for a much longer distance than for which they are being used. Sometimes attenuators are also used for stress testing a network link by incrementally reducing the signal strength (increasing the dB attenuation) until the optical link fails, thus determining the signal’s existing safety margin.
Request more information/offer
DT-CW5FP10G-ZR53
DT-CW5FP10G-ZR53 is hot pluggable Small-Form-Factor SFP+ Bi-directional transceiver module, which is designed for long reach 10Gb/s duplex optical data communications application. This SFP+ BiDi transceiver module also provides a unique enhanced digital diagnostic monitoring interface(DDMI), which provides real-time monitoring of the transceiver temperature, laser bias current, optical power, received optical power and transceiver supply voltage.
DT-CW5FP10G-ZR55
DT-CW5FP10G-ZR55 is hot pluggable Small-Form-Factor SFP+ Bi-directional transceiver module, which is designed for long reach 10Gb/s duplex optical data communications application. This SFP+ BiDi transceiver module also provides a unique enhanced digital diagnostic monitoring interface(DDMI), which provides real-time monitoring of the transceiver temperature, laser bias current, optical power, received optical power and transceiver supply voltage.
DT-FSP-10G-BXU-60km
DT-FSP-10G-BXU-60 km is hot pluggable Small-Form-Factor SFP+ Bi-directional transceiver module, which is designed for long reach 10Gb/s duplex optical data communications application. This SFP+ BiDi transceiver module also provides a unique enhanced digital diagnostic monitoring interface(DDMI), which provides real-time monitoring of the transceiver temperature, laser bias current, optical power, received optical power and transceiver supply voltage.
Request more information/offer
DT-SFP10G-BXD-20
DT-SFP10G-BXD-20 is hot pluggable Small-Form-Factor SFP+ Bi-directional transceiver module, which is designed for long reach 10Gb/s duplex optical data communications application. This SFP+ BiDi transceiver module also provides a unique enhanced digital diagnostic monitoring interface(DDMI), which provides real-time monitoring of the transceiver temperature, laser bias current, optical power, received optical power and transceiver supply voltage.
REQUEST MORE INFORMATION/OFFER
DT-SFP10G-BXD-40
DT-SFP10G-BXD-40 is hot pluggable Small-Form-Factor SFP+ Bi-directional transceiver module, which is designed for long reach 10Gb/s duplex optical data communications application. This SFP+ BiDi transceiver module also provides a unique enhanced digital diagnostic monitoring interface(DDMI), which provides real-time monitoring of the transceiver temperature, laser bias current, optical power, received optical power and transceiver supply voltage.
Request more information/offer
Fiber Optic Cable Slitter
Fiber optic cable slitter is a specialized tool used for cutting and stripping the outer jacket of fiber cables. It is designed to provide clean and precise cuts without damaging the delicate fiber strands inside. The slitter typically features sharp blades or cutting edges that are specifically designed for fiber optic cables.
Request more information/offer
Fiber Optic Pigtail, Single Mode, Simplex, SC/APC
Fiber Optic Pigtail, Single Mode, Simplex, SC/APC, is a specific hardware connection used for cable termination. On a fiber pigtail, one end of the wire is simply exposed fiber and the other end has a pre-installed connector on it.
FiberFox Mini 4S Fusion Splicer
FiberFox Mini 4S Fusion Splicer is a compact and portable fusion splicing machine designed for use in the field or in tight spaces.
Request more information/offer
FiberFox Mini 4S Fusion Splicer is a reliable and versatile splicing machine that is ideal for use in the field or in tight spaces.
FiberFox MINI6S
FiberFox MINI6S
The Smallest and Most Rugged Core Alignment Splicer- Core Alignment Fusion Splicer with 6 motors
- 900um/250um holder included!!
- Fastest Splicing Time
- 7 sec with single mode fiber
- 16 sec Heating time
- * 9 sec with continuous heating mode
- Comes with 2 Battery Packs
- Full Touch Screen
FWDM Module
FWDM Module (Filter Wavelength Division Multiplexer) is extensively used in EDFA, Raman amplifiers, WDM networks and fiber optics instrumentation. The FWDM series is based on environmentally stable Thin Film Filters technology. The device combines or separates light at different wavelengths in a wide wavelength range. They offer very low insertion loss, low polarization dependence, high isolation and excellent environmental stability. High power handling capability can be achieved through unique pigtail processing and high quality AR coating.
Request more information/offer
INNO IFS-15M
INNO IFS-15M
IFS-15M FTTH Fusion Splicer the IFS-15H FTTx fusion splicer will come with a standard 3 year warranty. This warranty covers all IFS-10 and IFS-15H FTTx fusion splicers. The IFS-15H is compatible with both fiber and cable splicing. INNO's newest fusion splicer technology combines the functions of both splicing fiber sizes that are popular in FTTH applications: 250µm fiber, 900µm fiber, flat cable, fiber jumper and splice-on connectors. Datasheet Request more information/offer
INS-DT32x20-32
INS-DT32x20-32 series is a low noise, high performance, FTTP high power, multi-ports optical amplifier with gain spectrum band within 1540~1563nm.
Each output port for optical amplifier has built-in well-performed CWDM.
Every external up-link optical port of optical amplifier can connect with OLT PON port very conveniently. Each 1550nm (CATV)'s output optical port multiplex 1310/1490n's data stream, in order to reduce the quantity of the component and improve the index and reliability of the system.
Datasheet
Shorter Casing Structure
Request more information/offer
Micro Optical Transmitter
Designed for FTTH (Fiber To The Home) networks; Excellent Linearity and flatness; Single-mode fiber high return loss; Using GaAs amplifier active devices; Ultra low noise technology; Using DFB coaxial small package laser.
Nokia 10GBASE-LR 10km SFP+
Nokia 10GBASE-LR 10km SFP+ are fully compatible with standard specifications such as SFF-8431 and SFF-8432. These transceivers support 10G Ethernet Long Reach and 10G Fibre Channel applications. They also offer flexibility and compatibility for various networking environments.
Request more information/offer
Nokia Alcatel-Lucent 3FE53441BA 01
Nokia Alcatel-Lucent 3FE53441BA 01 is a GPON OLT (Gigabit Passive Optical Network Optical Line Terminal) SFP module provided by Nokia.
Request more information/offer
Nokia XGS-PON OLT Class N2
Nokia XGS-PON OLT Class N2 is a specific type of Optical Line Terminal (OLT) equipment developed by Nokia. Nokia XGS-PON OLT Class N2 are key components in Passive Optical Networks (PONs) that serve as the central network node responsible for assemblage and managing data traffic between multiple end-users Optical Network Units or Optical Network Terminals .
Request more information/offer
Optical Fiber Pliers
Optical Fiber Pliers are tools used in fiber optic cable installation and maintenance. These pliers are designed to handle delicate optical fibers without causing damage. These Pliers typically feature precision tips for gripping and handling fiber optic connectors, cables, and components with precision and control.
Request more information/offer
Optical patch cable
Optical patch cable SC/APC-SC/UPC is a fiber optic cable that has a connector with a SC/APC (angled physical contact) connector on one end and a SC/UPC (unpolished connector) on the other end. The SC/APC connector is designed for use in applications that require high return loss, such as in long-haul telecommunications networks or CATV (Cable TV) networks, while the SC/UPC connector is used in applications where high return loss is not as critical.
Request more information/offer
Patch Cord APC-UPC-SM-SX
Patch Cord APC-UPC-SM-SX is a type of fiber optic patch cord that is designed for use in single-mode (SM) fiber optic networks. It includes connectors with an angled physical contact (APC) on one end and an ultra physical contact (UPC) on the other end. The APC connector ensures low back reflection and high return loss, making it adoptable for applications that require precise signal transmission.
Patch Cord G657A2
Patch Cord G657A2 high performance and high quality of connectors cable assembly are required for next generation optical networks to assure long term reliability for demanding applications such as FTTx, DWDM, 100G, CATV and etc. The connector assemblies are IEC, Telcordia and RoHS compliant.
The termination passed end faced inspection and 100% test for Insertion Loss (IL) and Optical Return Loss (ORL).
Request more information/offer
Patch Cord Lc-Pc-Om3-DX
Patch Cord LC-PC-OM3-DX is used to establish fiber optic connections between networking devices such as switches, routers, and optical transceivers. It provides reliable and high-speed data transmission over short distances within a network infrastructure.
Request more information/offer
Patch Cord SC/UPC-LC/UPC
Patch Cord SC/UPC-LC/UPC refers to a specific type of fiber optic patch cord used for single-mode applications. This patch cord includes an SC (Subscriber Connector) connector with an UPC (Ultra Physical Contact) polish on one end and an LC (Lucent Connector) connector with an UPC polish on the other end.
Request more information/offer
Pigtails
Pigtails
A fiber optic pigtail is a short optical fiber permanently attached to a source, detector, or other fiber optic device at one end and an optical connector at the other. Here the “source” is a transmitting LED or laser diode, or an instrument that injects test signals into fibers. A ”detector” here is an opto-electric transducer used to convert optical power to electrical current usually referred to as a photodiode. Request more information/offer
SC/UPC E2000/APC
SC/UPC E2000/APC patchcord is a fiber optic patchcord that has an SC/UPC connector on one end and an E2000/APC connector on the other end. This configuration allows for the connection between devices or equipment that have not the same connector types, while also ensuring low signal loss and minimal reflections due to the angled polishing of the E2000/APC connector.
Request more information/offer
SFP 1000Base TX Copper
The SFP 1000Base TX Copper module supporting 1000Mbps data rate up to 100 meters reach over unshielded twisted-pair category 5 cables. All four pairs in the cable are used with symbol rate at 250Mbps on each pair. The 10/100/1000 BASE-T physical layer IC (PHY) can be accessed via I2C, allowing access to all PHY settings and features.
Features
• Support up to 1000Mb/s data links
• Compliant with SFP MSA standard
• Compliant with IEEE 802.3z
• Hot-pluggable SFP footprint
• Single 3.3V power supply
• The compact RJ-45 connector assembly
• Low power dissipation
• Metal enclosure provides lower EMI
• ROHS compliant and Lead-Free
•10/100/1000 BASE-T operation in host systems with SGMII interface
Request more information/offer
SFP 10G BIDI Tx1270/Rx1330nm 20KM LC
SFP 10G BIDI Tx1270/Rx1330nm 20KM LC is hot pluggable Small-Form-Factor SFP+ Bi-directional transceiver module, which is designed for 10Gb/s duplex optical data communications application. The SFP+ BiDi module features a highly reliable 1330nm DFB transmitter and 1270nm PIN photo-detector into LC Simplex optical connector, which provides 20km link distance over single-strand single mode fiber.
Request more information/offer
SFP 10G BIDI Tx1270/Rx1330nm 40KM LC
SFP 10G BIDI Tx1270/Rx1330nm 40KM LC is easy to Use- Easy installation, plug and play, fully hot-pluggable. Widely used in fiber switches, routers, NIC, servers or other fiber optic equipments with 10Gb SFP+ ports.
Request more information/offer
SFP-1000Base-T GLC-T
SFP-1000Base-T compatible SFP transceiver supports up to 100m link lengths over a copper connection via a RJ-45 connector. Each SFP transceiver module is individually tested to be used on a series of Cisco switches, routers, servers, network interface card (NICs)...
Request more information/offer
Splicer AI-8
It use the latest core alignment technology with auto focus and six motors, it is a new generation of fiber fusion splicer. It is fully qualified with 100 km trunk construction, FTTH project, security monitoring and other fiber cable splicing projects.
The Splicer AI-8 uses industrial quad-core CPU, fast response, is currently one of the fastest fiber splicing machine in the market; with 5-inch 800X480 high-resolution screen, the operation is simple and intuitively; and up to 300 times focus
Request more information/offer
Splicer AI-9
It use the latest core alignment technology with auto focus and six motors, it is a new generation of fiber fusion splicer. It is fully qualified with 100 km trunk construction, FTTH project, security monitoring and other fiber cable splicing projects. The machine uses industrial quad-core CPU, fast response, is currently one of the fastest fiber splicing machine in the market; with 5-inch 800X480 high-resolution screen.
Request more information/offer
Splicer INNO IFS-15S
IFS-15S core-alignment fusion splicer with the new Digital Analysis Core Alignment System is one of the most dependable splicer on the market.
The IFS-15S has a friendly, intuitive GUI with a 4.3 inch high-resolution color LCD screen that is easy to see and use. With a compact size of the fusion splicer (155mm*130mm*137mm), IFS-15S STANDARD Master brings much more convenience for customers who works in the telecommunication field.
Request more information/offer
Splitter Cassette 1×4
Splitter cassette 1×4 is a device used in fiber optic networks to split an incoming optical signal into multiple output signals. The “1×4” designation express that the splitter cassette has one input port and 4 output ports.
Request more information/offer
Splitter Cassette 1X16
Splitter cassette 1×16 is a device used in fiber optic networks to split an incoming optical signal into multiple output signals. The “1×16” designation express that the splitter cassette has one input port and 16 output ports.
Request more information/offer
Splitter Cassette 1×8
Splitter cassette 1x8 is a device used in fiber optic networks to split an incoming optical signal into multiple output signals. The "1x8" designation express that the splitter cassette has one input port and eight output ports.
Request more information/offer
