NuCom NC-WR644GACV
Designed as part of the NuCom FTTH solution, this router offers ultra-broadband access for residential clients and businesses.
Here Are The Specification :
| GENERAL | |
| Wireless standards | IEEE802.11a/n/ac, 5GHz
IEEE802.11b/g/n, 2.4GHz |
| Signal Rate | 5GHz:Up to 867Mbps
2.4GHz:Up to 300Mbps |
| Operation Frequency | 2.4GHz and 5GHz |
| Receive Sensitivity | 5GHz:
11a 6Mbps : -96dBm, 11a 54Mbps: -79dBm 11ac HT20: -71dBm, 11ac HT40: -66dBm, 11ac HT80: -63dBm, 11n HT20: -72dBm, 11n HT40: -71dBm 2.4GHz: 11g 54M: -77dBm 11n HT20: -74dBm, 11n HT40: -72dBm |
| Wireless Security | WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK encryption |
| VoIP Standars | SIP (RFC3261), ITU-T G.729/G.722/G.711a/G.711 |
| VoIP features | Callforwarding, Callwaiting, Callblock, 3-way conferencecall, etc. |
| HARDWARE | |
| Interfaces | 4 x 10/100/1000Mbps LAN Port
1 x 10/100/1000Mbps WAN Port 2 x FXS port for VoIP 1 x USB3.0 Port 1 x Power Connector |
| Buttons | Power ON/OFF Button, WPS Button, WiFiButton，Reset Button |
| Power Supply | DC 12 V 2 A |
| Antennas | 2 x 2.4GHz/5GHz 5 dBifixed Omni-directional Antennas |
| SOFTWARE | |
| WAN | Dynamic IP/Static IP/PPPoE, Bridge |
| DHCP | Server, Client, DHCP Client List, Address Reservation |
| QoS | WMM, Bandwidth Control |
| Port Forwarding | Virtual Server, Port Triggering, UPnP, DMZ |
| VPN Pass-Through | PPTP, L2TP, IPSec |
| Access Control | Parental Control, Local Management Control, Host List, AccessSchedule, Rule Management |
| Firewall Security | DoS, SPI FirewallIP Address Filter/MAC Address Filter/Domain FilterIP and MAC Address Binding |
| USB Sharing | Support Samba(Storage)/ FTP Server/ Media Server/ Printer Server/ DLNA |
| Management | Remotely managed using TR069 by Felix-Alea |
| Internet Protocol | IPv4, IPv6 |
| ENVIRONMENT | |
| Operating Temperature | 0°C~40°C |
| Storage Temperature | -40°C~70°C |
| Relative Humidity | 10% ~ 90%, non-condensing |
| Storage Humidity | 5% ~ 95%, non-condensing |
| Certifications | CE, RoHS |
