Specifications: The LC UPC to LC UPC connector type is used for this fiber cable. The fiber grade is bend insensitive, allowing for flexibility without significant signal loss. The fiber mode is OM4 with a diameter of 50/125μm. The cable operates at a wavelength of 850/1300nm. For 40G Ethernet, the cable supports a distance of up to 150m at 850nm. For 100G Ethernet, the cable supports a distance of up to 100m at 850nm. The insertion loss of the cable is equal to or less than 0.3dB. The return loss is equal to or greater than 30dB. The minimum bend radius for the fiber core is 7.5mm. The minimum bend radius for the fiber cable is 20/10D (Dynamic/Static), where D is the cable diameter. The attenuation of the fiber at 850nm is 3.0dB/km. The attenuation of the fiber at 1300nm is 1.0dB/km. The fiber count is duplex, allowing for bidirectional communication. The cable has a diameter of 2.0mm. The cable jacket is made of PVC material. The polarity of the cable follows the A (Tx) to B (Rx) configuration. The operating temperature range is from -20 to 70°C (-4 to 158℉). The storage temperature range is from -40 to 80°C (-40 to 176℉).