PRODUCTS

SFP 1000Base TX Copper

The SFP 1000Base TX Copper module supporting 1000Mbps data rate up to 100 meters reach over unshielded twisted-pair category 5 cables. All four pairs in the cable are used with symbol rate at 250Mbps on each pair. The 10/100/1000 BASE-T physical layer IC (PHY) can be accessed via I2C, allowing access to all PHY settings and features. Features • Support up to 1000Mb/s data links • Compliant with SFP MSA standard • Compliant with IEEE 802.3z • Hot-pluggable SFP footprint • Single 3.3V power supply • The compact RJ-45 connector assembly • Low power dissipation • Metal enclosure provides lower EMI • ROHS compliant and Lead-Free •10/100/1000 BASE-T operation in host systems with SGMII interface  Request more information/offer

SFP 10G BIDI Tx1270/Rx1330nm 20KM LC

SFP 10G BIDI Tx1270/Rx1330nm 20KM LC is hot pluggable Small-Form-Factor SFP+ Bi-directional transceiver module, which is designed for 10Gb/s duplex optical data communications application. The SFP+ BiDi module features a highly reliable 1330nm DFB transmitter and 1270nm PIN photo-detector into LC Simplex optical connector, which provides 20km link distance over single-strand single mode fiber.  Request more information/offer

SFP 10G BIDI Tx1270/Rx1330nm 40KM LC

SFP 10G BIDI Tx1270/Rx1330nm 40KM LC is easy to Use- Easy installation, plug and play, fully hot-pluggable. Widely used in fiber switches, routers, NIC, servers or other fiber optic equipments with 10Gb SFP+ ports.  Request more information/offer

SFP-1000Base-T GLC-T

SFP-1000Base-T compatible SFP transceiver supports up to 100m link lengths over a copper connection via a RJ-45 connector. Each SFP transceiver module is individually tested to be used on a series of Cisco switches, routers, servers, network interface card (NICs)...  Request more information/offer

Solar Panel 550W

Assembled with high-efficiency Multi-busbar PERC cells, the half-cell configuration of the modules offers the advantages of higher power output, better temperature-dependent performance, reduced shading effect on the energy generation, lower risk of hot spot, as well as enhanced tolerance for mechanical loading.

SPA-1X10GE-L-V2

The SPA-1X10GE-L-V2 is available on high-end Cisco routing platforms, offering the benefits of network scalability with lower initial costs and ease of upgrades. The Cisco SPA/SIP portfolio continues Cisco's focus on investment protection along with consistent feature support, broad interface availability, and the latest technology. The Cisco SPA/SIP portfolio allows deployment of different interfaces (packet over SONET/SDH [POS], ATM, Ethernet, etc.) on the same interface processor.  Request more information/offer

SPA-2X1GE-V2

SPA-2X1GE-V2 is a  module or interface card designed for use with Cisco networking equipment. It deliveres two Gigabit Ethernet (1GE) ports, allowing for high-speed data transmission and network connectivity.  Request more information/offer

Speedport LTE II

The Speedport LTE II WLAN router for fast internet access in residential areas without DSL LTE to reach up to 100 Mbit/s. You can also a wireless home network with up to 300 Mbit/s. The speed port LTE II enables fast internet access via the mobile network. Thus, it is particularly suitable for areas with poor or no DSL supply.  Request more information/offer

Splicer AI-8

It use the latest core alignment technology with auto focus and six motors, it is a new generation of fiber fusion splicer. It is fully qualified with 100 km trunk construction, FTTH project, security monitoring and other fiber cable splicing projects. The Splicer AI-8 uses industrial quad-core CPU, fast response, is currently one of the fastest fiber splicing machine in the market; with 5-inch 800X480 high-resolution screen, the operation is simple and intuitively; and up to 300 times focus  Request more information/offer

Splicer AI-9

It use the latest core alignment technology with auto focus and six motors, it is a new generation of fiber fusion splicer. It is fully qualified with 100 km trunk construction, FTTH project, security monitoring and other fiber cable splicing projects. The machine uses industrial quad-core CPU, fast response, is currently one of the fastest fiber splicing machine in the market; with 5-inch 800X480 high-resolution screen.  Request more information/offer

Splicer INNO IFS-15S

IFS-15S core-alignment fusion splicer with the new Digital Analysis Core Alignment System is one of the most dependable splicer on the market. The IFS-15S has a friendly, intuitive GUI  with a 4.3 inch high-resolution color LCD screen that is easy to see and use. With a compact size of the fusion splicer (155mm*130mm*137mm), IFS-15S STANDARD Master brings much more convenience for customers who works in the telecommunication field.  Request more information/offer

Splitter Cassette 1×4

Splitter cassette 1×4  is a device used in fiber optic networks to split an incoming optical signal into multiple output signals. The “1×4” designation express that the splitter cassette has one input port and 4 output ports.  Request more information/offer

Splitter Cassette 1X16

Splitter cassette 1×16  is a device used in fiber optic networks to split an incoming optical signal into multiple output signals. The “1×16” designation express that the splitter cassette has one input port and 16 output ports.  Request more information/offer

Splitter Cassette 1×8

Splitter cassette 1x8  is a device used in fiber optic networks to split an incoming optical signal into multiple output signals. The "1x8" designation express that the splitter cassette has one input port and eight output ports.  Request more information/offer

TC7210

The TC7210 is one of the first dual band concurrent Wi‑Fi ultra broadband gateways to feature the next-generation IEEE 802.11ac wireless standard for the 5 GHz band. With its optimized antenna configuration, this enhanced wireless solution enables even higher throughput and better coverage over the much less crowded 5 GHz radio, for real-time content delivery. Simultaneously, it guarantees uninterrupted transmission of data services over IEEE 802.11n using the 2.4 GHz band.

DATASHEET  Request more information/offer

TC7230

Next-Gen Wireless Technology for Next-Gen Speeds

Featuring next-generation IEEE 802.11ac Wi-Fi, this enhanced wireless solution with beamforming technology enables even higher throughput and better coverage over the much less crowded 5GHz radio, for real-time content delivery.

As a dual band concurrent wireless gateway, the TC7230 also guarantees uninterrupted transmission of data services over IEEE 802.11n using the 2.4 GHz band.

DATASHEET  Request more information/offer

TCG300 EuroDocsis 3.0 Cable Modem

TCG300 EuroDocsis 3.0 Cable Modem is designed to be fully compliant with the EuroDOCSIS 3.0 standard. It offers seamless compatibility with past versions of DOCSIS networks, ensuring reliable and high-speed internet access for residential, commercial, and more .  Request more information/offer

Technicolor CGA2121

The Technicolor CGA2121 is a modem/router device used to provide Internet connectivity. It is likely a cable modem that uses coaxial cable (such as that used for cable television) to connect to the Internet service provider's network. The router component provides Wi-Fi and Ethernet connectivity to local devices, allowing them to access the Internet. The CGA2121 is a gateway device that combines a cable modem, router, and wireless access point into a single device, making it a convenient and cost-effective solution for many households. Some models may also include additional features such as parental controls and guest networking.  Request more information/offer

Technicolor CGA4233

Technicolor CGA4233

Is a DOCSIS 3.1 capable cable gateway offering triple-play services beyond Gigabit speeds, while providing VoIP functions for residential and business users. Technicolor CGA4233 can support seamless real-time HD video streaming over next generation IEEE 802.11ac Wi-Fi without any interruption of your data traffic.  Request more information/offer

Technicolor CGA4233VDF

Technicolor CGA4233VDF wireless gateway/router. It is a device that combines the functions of a modem and a router into a single unit. It is commonly used by service providers to provide  internet connectivity to homes or businesses .  Request more information/offer

Technicolor DGA0130VDF

Technicolor DGA0130VDF is a model of router/modem manufactured by Technicolor. It is commonly used by internet service providers  to deliver internet connectivity to residential or small business customers.  Request more information/offer

Technicolor DWT765MM

Technicolor DWT765MM is an Android TV set-top box that provides an interactive and connected TV experience. It runs on the Android TV operating system, which offers access to a range of streaming apps, games, and other content .  Request more information/offer

Technicolor TC7200

Technicolor TC7200

Type: TC7200
Channel bonding: 8x4
WIFI standard: 802.11n
Main category: Modem
Condition: Refurbished
DOCSIS version: 3.0
US / EURO: Hybrid (annex A+B)
Ethernet ports: 4
Ethernet speed: 10/100/1000
WIFI frequency: 2.4GHz or 5GHz
VoIP protocol: SIP + MGCP
 Request more information/offer

Technicolor TCM471

The  Technicolor TCM471 comes in the sleek attractive design Technicolor has adopted as the new family look. With the evolution of cable standards, DOCSIS/EuroDOCSIS 3.0 will prove decisive for cable operators wishing to provide high bandwidth data delivery and to stay ahead of the content with game and video over IP delivery.  Request more information/offer

Technicolor TG788vn v2

Technicolor TG788vn v2 Features
  • Integrated VDSL2 modem
  • 4 FE ports to connect multiple devices, such as PCs, laptops, set-top boxes...
  • Wireless networking on-board: 802.11b/g/n (2.4 GHz)
  • WiFi Protected Setup (WPS)
  • 2 FXS ports
  • Media sharing: UPnP A/V and DLNA
  • 1 USB 2.0 master for hard disk, printer, 3G adapter ...
  • Remotely manageable: TR-069, TR-098, TR-104, TR-111
  • Built-in stateful firewall, parental control
  • Innovative, easily customizable design
  • Future-proof hardware and software
  • IPv6 ready
 Request more information/offer

Technicolor TG789 Lvnv 4

The Technicolor TG784n v3 is especially suited for complex network scenarios where several access technologies, such as ADSL and Fiber To The x (FTTx) co-exist. Thanks to its WAN Port Auto-Sensing feature the Technicolor TG784n v3 can automatically select among DSL, Ethernet WAN or 3G (via USB adapter) interfaces and connect without any manual operation. This means simplicity for the end user and reduced complexity for the operator. With an improved coverage and throughput compared to any 11b/g or 1x1 11n access point, the Technicolor TG784n v3 enables real-time multimedia content streaming over the Wi-Fi network everywhere in the house. Its wireless range and coverage makes it the best wireless gateway currently on the market.  Request more information/offer

Technicolor TG789Lvnv4

Technicolor TG789vn v4

Is a unique future-proof triple-play service gateway allowing VDSL2 connectivity while providing Voice over IP functions for residential users. A dedicated Gigabit Ethernet WAN port and WAN Port Auto-Sensing make the Technicolor TG789vn v4 also the ideal service gateway for deployment in mixed DSL and fiber-based access networks. It offers next to four Fast Ethernet LAN ports, a IEEE 802.11b/g/n wireless LAN Access Point. Moreover, it acts like a central hub for distribution of all content from any device to any device in the home. The Technicolor TG789vn v4 is easily manageable thanks to its best-in-class TR-069 interoperability.  Request more information/offer

Technicolor TG789vac V2

Technicolor TG789vac V2 is a router  produced by Technicolor that supports various connection types, including ADSL, VDSL, and Ethernet WAN also is Compatible with both IPv4 and IPv6 protocols.  Request more information/offer

Technicolor THG570

The  Technicolor THG570 comes in the sleek attractive design Technicolor has adopted as the new family look. With the evolution of cable standards, DOCSIS/EuroDOCSIS 3.0 will prove decisive for cable operators wishing to provide high bandwidth data delivery and to stay ahead of the content with game and video over IP delivery.  Request more information/offer

Technicolor THG571

The  Technicolor THG571 comes in the sleek attractive design Technicolor has adopted as the new family look. With the evolution of cable standards, DOCSIS/EuroDOCSIS 3.0 will prove decisive for cable operators wishing to provide high bandwidth data delivery and to stay ahead of the content with game and video over IP delivery.  Request more information/offer

Technicolor TWG870

The  Technicolor TWG870 comes in the sleek attractive design Technicolor has adopted as the new family look. With the evolution of cable standards, DOCSIS/EuroDOCSIS 3.0 will prove decisive for cable operators wishing to provide high bandwidth data delivery and to stay ahead of the content with game and video over IP delivery.  Request more information/offer

Televes GPON ONT Office 769501

Televes GPON ONT Office 769501 is designed to provide the connectivity needs of office environments, providing a reliable and efficient solution for high-speed internet access, wireless connectivity, and multimedia content delivery.  Request more information/offer

Telmor WHX 923

Telmor WHX 923

It has been designed for professional multimedia CATV networks which make an intensive use of the return path transmission, especially those with HFC architecture. In such networks the WHX Amplifier performs the function of final Amplifier. The WHX Amplifiers are available with various options differing from the return path bandwidth, type of power supply (locally or remotely powered) and connector: F, PG 11 and 5/8"  Request more information/offer

Time Creator 1000

-The Time Creator 1000 flexible deployment enables network operators to balance economics, scalability, functionality and carrier class reliability against the demand of consumers for high-speed, high-bandwidth networks. Time Creator 1000 is a fundamental part of a cable operator's headend or hub network deploying M-CMTS, DOCSIS 3.0 or Business Services over DOCSIS. The Time Creator 1000 provides cable operators with an essential part of the infrastructure they need to build secure, fast, state-of-the-art networks while increasing scalability and flexibility for advanced, next-generation standards including DOCSIS 3.0.  Request more information/offer

TP-Link Archer MR200

TP-Link Archer MR200 is a wireless dual-band 4G LTE router designed for providing internet connectivity in areas where wired broadband is not available or unreliable. It offers a convenient solution for accessing the internet using a 4G LTE mobile network.  Request more information/offer

TP-Link AV500 2-Port Powerline Starter Kit

TP-Link AV500 2-Port Powerline Starter Kit

Brand TP-Link Hardware Interface Ethernet Operating System Windows 10/8.1/8/7, Linux Item Dimensions LxWxH 2 x 2.6 x 1.1 inches Data Link Protocol IEEE 802.3, Ethernet, Fast Ethernet Data Transfer Rate 500 Megabits Per Second Item Weight 1 Pounds  Request more information/offer

Tp-link TL-MR6400

Tp-link TL-MR6400 upgrades your network to the next generation of Wi-Fi. With combined wireless speeds of up to 1750Mbps, the device provides better speeds and wireless range. And it provides cost-effective VoIP services with 2 FXS Port.  Request more information/offer

uBR10-DTCC

uBR10-DTCC card acts as a secondary processor that performs the following functions. Two DTCC cards are installed and configured as active (primary) and backup (redundant).

 Request more information/offer

UBR10-PRE5-10G

The Cisco UBR10-PRE5-10G Performance Routing Engine 5 (UBR10-PRE5) is the next-generation high-performance route processor for the Cisco uBR10012 Universal Broadband Router. With the Cisco uBR10012 PRE5 , the Cisco uBR10012 provides cable operators with an easy, flexible upgrade path toward a Converged Cable Access Platform (CCAP) and an all-IP infrastructure, while reducing the effect on operations, capital expenditure (CapEx) and rack space requirements.  Request more information/offer

UBR10-PRE5-20G

The Cisco UBR10-PRE5-20G Performance Routing Engine 5 (UBR10-PRE5) is the next-generation high-performance route processor for the Cisco uBR10012 Universal Broadband Router. With the Cisco uBR10012 PRE5 , the Cisco uBR10012 provides cable operators with an easy, flexible upgrade path toward a Converged Cable Access Platform (CCAP) and an all-IP infrastructure, while reducing the effect on operations, capital expenditure (CapEx) and rack space requirements.  Request more information/offer

UBR10-PRE5-40G

The Cisco UBR10-PRE5-40G Performance Routing Engine 5 (UBR10-PRE5) is the next-generation high-performance route processor for the Cisco uBR10012 Universal Broadband Router. With the Cisco uBR10012 PRE5 , the Cisco uBR10012 provides cable operators with an easy, flexible upgrade path toward a Converged Cable Access Platform (CCAP) and an all-IP infrastructure, while reducing the effect on operations, capital expenditure (CapEx) and rack space requirements.  Request more information/offer

VDSL Router VR-3041u

VDSL Router VR-3041u The VDSL Router VR-3041u is an 802.11n compliant Multi-DSL router that supports both ADSL2+ and VDSL2. VDSL2 is a brand new standard and technology perfect for triple play (Video, Voice and Data) applications. The VR-3041u comes with four 10/100 Base-T Ethernet ports, and one USB host, combining wired LAN connectivity and an integrated 802.11n WiFi WLAN Access Point (AP) for wireless connectivity.

Visual Fault Locator

Visual Fault Locator  is a handheld optical testing device used in fiber optic networks to spot and locate faults or breaks in the fiber optic cables. It emits a  visible laser light that can be seen through the fiber optic cables, making it easier to identify breaks, bends, or other issues in the cable.

Wideband Shared Port Adapter (SPA)

Wideband Shared Port Adapter (SPA) can support two Cisco 10000 Series SPA Interface Processor-600 (SIP-600). Each Cisco 10000 Series SIP-600 can support up to four Cisco 6 Gbps Wideband SPA cards, or a total of 576 DOCSIS downstream channels or 432 Euro-DOCSIS downstream channels per Cisco 10000 Series SIP-600 with about 2:1 oversubscription due to the bandwidth limit of 11.2 Gbps per Cisco 10000 Series SIP-600.  Request more information/offer

WiFi Powerline PG-9072LG-UF

WiFi PowerLine PG-9072LG-UF   network transmitters is a modern solution for expanding a computer network via an AC 230V electrical installation with support for 802.11ac 5GHz and Gigabit LAN 1 Gb/ s (1000 Mbit/s).  Request more information/offer

WiFi PowerLine PG-9073LG-UF

WiFi PowerLine PG-9073LG-UF   network transmitters is a modern solution for expanding a computer network via an AC 230V electrical installation with support for 802.11ac 5GHz and Gigabit LAN 1 Gb/ s (1000 Mbit/s).

 Request more information/offer