Sagemcom Fast 5655v2 GPON wifi 2.4/5G CaTV
The GPON system is a single-fiber bidirectional system. It uses wavelengths 1310 nm in TDMA mode in the upstream direction and wavelengths 1490 nm in broadcast mode in the downstream direction. Maximum downstream rate at the GPON physical layer is 2.488 Gbit/s, maximum upstream rate at the GPON physical layer is 1.244 Gbit/s.
Supports a maximum logical distance of 60 km and a physical distance of 20 km between theremotest ONT and nearest ONT, which are defined in ITU-T G.984.1. Supports a maximum of eight T-CONTs. Supports T-CONT types Type1 to Type5. One T-CONT supports multiple GEM ports (maximum of 32 GEM ports are supported).Supports three authentication modes: by SN, by password, and by SN+password
| Ethernet Features | Description |
|---|---|
| Auto-negotiation | Supports auto-negotiation of rate and duplex mode for seamless connectivity |
| MDI/MDI-X auto-sensing | Auto-senses and configures MDI (Media Dependent Interface) and MDI-X connections |
| Ethernet frame size | Supports Ethernet frames of up to 2000 bytes |
| Local switch MAC entries | Up to 1024 local switch MAC entries for efficient MAC address management |
| MAC forwarding | Provides MAC forwarding capabilities for efficient data transmission |
| Route Features | Description |
|---|---|
| Static route | Supports static routing for defined and fixed paths |
| NAT, NAPT, and extended ALG | Supports Network Address Translation (NAT), Network Address and Port Translation (NAPT), and extended Application Layer Gateway (ALG) for enhanced network functionality |
| DHCP server/client | Supports Dynamic Host Configuration Protocol (DHCP) server and client capabilities for automatic IP address assignment and configuration |
| PPPoE client | Supports Point-to-Point Protocol over Ethernet (PPPoE) client for connecting to the internet through an Ethernet interface |
| CATV |
|---|
