Cisco UBR10-PWR-AC
-The Cisco UBR10-PWR-AC router supports data and digitized voice connectivity over a bidirectional cable television and IP backbone network, using advanced quality of service (QoS) techniques to ensure that real-time traffic such as voice can be reliably delivered, while still transmitting other traffic on a best-effort basis.
-The Cisco uBR10012 router concentrates traffic from two-way DOCSIS-based cable modems and STBs that is transmitted over the coaxial cable television (CATV) network, and presents that traffic to local and remote Internet Protocol (IP) hosts over its high-speed network uplink interfaces.
Cisco UBR10-PWR-AC Broadband Router is a communications-grade cable modem termination system (CMTS) that helps cable operators advance their traditional cable infrastructures to an IP network
-The Cisco UBR10-PWR-AC universal broadband router provides a high-end, high-performance, high-capacity Cable Modem Termination System (CMTS) solution.
Router is an aggregation platform that places a new level of intelligence and performance at the edge of the network, enabling cable service providers to maximize their revenues by delivering more feature-rich services to their customers. The system can provide high-speed data, broadband entertainment, and IP telephony services to residential and commercial subscribers using cable modems or digital set-top boxes (STBs).
Part Number of Cisco UBR10-PWR-AC is UBR10-PWR-AC-PLUS. The Product families UBR10012 and the type uBR10012 PS AC PLUS.
Main category CMTS and the condition is refurbished
The Cisco UBR10-PWR-AC router is shipped with two AC power entry modules (AC PEMs) that provide power supply to the system. One AC PEM module is sufficient to provide power for a fully configured chassis. However, if one AC PEM module fails, the other AC PEM module automatically begins providing power to the entire chassis, without impacting the system operation.
Cisco UBR10-PWR-AC modules use a standard 200–240 VAC (50 or 60 Hz) input power obtained through power receptacles on the front panel of each PEM. The two AC PEMs convert the AC power to provide filtered, redundant, and load shared DC power to the Cisco uBR10012 chassis. The AC PEM modules can be identified by their product part numbers.
The AC PEM modules supported on the Cisco uBR10012 chassis are:
AC PEM Module (UBR10-PWR-AC=)
AC PEM Module (UBR10-PWR-AC-PLUS=)
Cisco UBR10-PWR-AC
Component UBR10-PWR-AC-PLUS= UBR10-PWR-AC=
Cisco AC PEM (Part Number)1 341-0387-01 34-1966-02
Power Output 3300 W 2400 W
DC-output Voltage 57.5 VDC 54 VDC
AC-input Power Connections 13 A + 13 A 13 A
AC-input Voltage 200-240 VAC (50 or 60 Hz) 200-240 VAC (50 or 60 Hz)
Physical Differences of Cisco UBR10-PWR-AC
Weight 19 lbs (8.64 kg) 14.7 lbs (6.65 kg)
LEDs 4 2
PRODUCT ID LED/switch Yes No
