Casa C3200 CMTS DOCSIS 3.0 comes in a compact 3RU form factor. However it is based on a modular architecture that gives cable operators the maximum flexibility in tailoring, and also their networks according to the requirements of their services.
-The Casa C3200 CMTS DOCSIS 3.0 consists of a base system with one Switch and Management Casa C3200 also module slot and six slots for DOCSIS interface modules.
Features of the DOCSIS 3.0
- Full DOCSIS 3.0 qualified
- Separate downstream and upstream modules
- Cost effectiveness
- Software licensing
- Superior density
- Best multi-channel RF performance
- High availability
- Static and dynamic load balancing for single
- Bonded channels
- Extensive show cable modem commands
- Spectral management
- System resource reporting
- User privilege management
-The Casa Systems C3200 Cable Modem Termination System is also a new class of cable edge device that combines a third generation DOCSIS CMTS and an MPEG video Edge‑QAM in a very high density, and high availability 3RU platform. The C3200 can support up to 80 downstream QAM channels in 3RU also .
-C3200 CMTS supports complete separation of downstream channel capacity from upstream channel capacity and providing a flexible downstream to upstream channel ratio. This allows also cable operators to add downstream channels and upstream channels . Completely independently within the same chassis allowing them to address specific as a result end user requirements . For example, business users typically require a symmetrical downstream to upstream traffic ratio, while residential users require a more asymmetric ratio.
-C3200 CMTS delivers very high channel density , supporting up to 80 downstream QAM channels per platform. The superior downstream channel density makes it extremely cost effective for cable operators to enable next generation services such as video-over-IP.
Full DOCSIS 3.0 Qualified
Multi-channel DRFI RF for Annex A, B, & C, downstream channel bonding up to 16 channels, upstream channel bonding up to 16 channels, IPv6, AES encryption/decryption, multicast QoS, bonded channel multicast, full DOCSIS 3.0 MIBs, and IPDR
Cost Effectiveness
Industries lowest cost per DOCSIS 3.0 channel, delivering an economical solution for high bandwidth multimedia applications
Software Licensing
Ability to remotely activate additional channels as needed up to the available physical capacity of the module
Superior Density
Offering the highest channel density in the industry, ranging from 80DSx16US for IP video to 48DSx48US for typical broadband service deployment in a single chassis
Best Multi-Channel RF Performance
Exceeds DOCSIS DRFI specification
DOCSIS 1.1 and 2.0 Features
Complete DOCSIS/EuroDOCSIS 1.1 and 2.0 feature sets; PacketCable and PCMM support, L2VPN, and DSG
Rich Operational Features
Rich operational features include; show cable modem, flap list, spectral management and IP bundling
High Availability
Hot-swappable modules include; dual AC or DC power supplies, fan trays and line card modules including GigE link redundancy
Mechanical Casa C3200 DOCSIS 3.0 specification
Form Factor – 3RU
Height – 5.25 in. / 133.35 mm
Width – 19 in. / 482.6 mm
Depth – 23.5 in. / 597 mm
Weight – 70 lbs
Mounting – 19 inch, 3 rack unit high
Front Panel LED – power, alarm
Regulatory Compliance
Safety: UL/IEC/CSA 60950-1
EMC: FCC Part 15 Class A & CISPR Class A
Immunity: EN61000-4
Operating temperature 0° to 50° C
Storage temperature -40° to 70° C
